The kit includes:
- Rubber stamp with washable base
- PREMIUM Ink 120 cc (black color)
- Roller to apply ink to the stamp
- Glass plate for ink application
PREMIUM Ink:
Ideal for stamping paper, cardboard, ecommerce bags, friselina, canvas, and similar materials, as well as MDF and fiberboard. While it is not 100% indelible and not resistant to many washes, it will not run when exposed to water after 48/72 hours of stamping.
Available colors:
The kit price includes BLACK ink. If you want a different color, you will need to pay an additional fee. You can view the available colors at the following link:
Available colors
PREMIUM Ink features:
This ink has a thicker viscosity because it requires more adherence to the surfaces being stamped to achieve greater contrast.
White packaging ink is more viscous than other colors and may present some difficulty if the ink application and stamping process are not done quickly, as its viscosity increases as it dries.
Drying time:
On plastic materials, a drying time of about 1 hour is required.
On these materials, the stamp does not withstand high levels of friction, so the stamping process must be done with controlled pressure to prevent the stamp from slipping on the surface and the print from smearing.
Recommendations:
- Work in batches for better efficiency.
- For each ink application, start with a small amount: place a little ink on the plate, spread it with a spatula or similar tool, and then roll the roller, always rotating in the same direction.
- Do some tests and decide whether you need to add more ink.
- Avoid leaving too much time between applying ink to the plate and stamping. As time passes, the packaging ink loses moisture and becomes more viscous.
- If the ink dries too much, it will thicken and may stick, especially on thinner papers.
- Before stamping the pieces, perform test stamps on a similar but disposable material to get familiar with the process.
- On plastic materials, control the pressure on the stamp, as it may slip.
- Once the stamping job is done, clean the roller and plate with plenty of water. Clean the stamp carefully with water and a soft sponge or cloth to remove excess paint from the rubber.
Recommended designs:
We do not recommend logos and/or designs with solid (or filled) backgrounds and very fine lines, as these lines may not appear clearly in the stamping. This can only be seen once the product is finished. For this reason, we recommend inverting designs with these characteristics.
How to use the kit:
See how to use the kit in the following link:
See how to use the kit
Custom designs:
You can choose one of our designs or send us your own design in black and white in Illustrator format (with text converted to outlines), PDF, or EPS.
If the format is JPG, PNG, or TIFF, please send it with a resolution of 300 dpi.
If you don't have the design in the mentioned formats, you can send it in the format you have available, and we will review it to see if it’s suitable for processing.
IMPORTANT:
The rubber in the selected stamp size will be 3 mm smaller on each side (or based on the design proportions) to avoid stamping issues.
Before choosing the stamp size, check your design proportions. If your design is smaller than the stamp size you selected and does not cover the entire surface, we will change the stamp size WITHOUT PRIOR NOTICE, and this change will not affect the price you paid.
If a larger base is needed, we will send you an email indicating the necessary change and the additional cost for your approval.
Send your designs:
Once you complete your purchase, send your design(s) to [email protected].
Custom sizes:
We make stamps of all sizes. If your design has a size you cannot find in the list, choose the one closest to your needs. If you need a size larger than 20x20 cm, feel free to contact us!
